Below are some of the many different window types Cityproof can design. Windows can vary in design and style including horizontally or vertically sliding panels, stationary/lift-out panels, hinged panels or a combination of styles.
Cityproof custom manufactures each unit to mirror the existing exterior window as closely as possible. View the installation showcase for installed examples.
The unit consists of a horizontal transom with two (2) horizontally sliding framed glass panels above the transom and an air conditioner enclosure below the transom. The air conditioner enclosure is shown with a large center lift-out framed glass panel.
The unit consists of a horizontal transom with two (2) horizontally sliding framed glass panels above the transom and an air conditioner enclosure below the transom. The air conditioner enclosure is shown with two (2) hinged framed glass panels (doors).
The unit consists of a horizontal transom with two (2) horizontally sliding framed glass panels above the transom and one (1) stationary/lift-out framed glass panels below the transom.
To consist of (1) fixed arch section above a horizontal transom bar and (2) full-height horizontally sliding/lift-out framed glass panels below the transom.
To consist of one (1) double-hung tilt sash interior window positioned above a thru-window A/C enclosure with one (1) lift-out framed glass panel. (Frame depth for this unit style is 3 1/4″ deep — A/C enclosure depth varies).
To have a horizontal transom (positioned to align with meeting sash of exterior window) with three horizontally sliding/lift-out framed glass panels at upper section and two (2) stationary lift-out framed glass panels at lower section on each side of the PTAC unit (Frame depth for this unit style is 2″).